Motorola has released its two new premium smartphones called Motorola Edge and Edge Plus in May 2020. Both the devices do come with Android 10 out-of-the-box. As the Android 11 is a couple of months away from launch, the Motorola Edge/Edge+ users are excited to receive the upcoming Android 11 update very much.
Today Motorola has finally rolled the Android 11 update to the Motorola Edge and Edge Plus globally which brings all the Android 11 features and customization. In this guide, we will show you how to install the Android 11 firmware file manually on Motorola Edge and Edge Plus.
Download Motorola Edge and Edge Plus Android 11 Update
Here you can download the official Android 11 for the Motorola Edge and Edge Plus.
Motorola Edge Android 11 Update
Motorola Edge Plus Android 11 Update
Steps to Install Motorola Edge and Edge Plus Android 11 Update
Now, if you’re ready to flash the Android 11 manually on your Motorola Edge and Edge Plus device then you need to download the drivers, firmware file, and tools. So, without wasting any more time, let’s get into it.
Pre-Requirements:
- This ROM is supported for the Motorola Edge and Edge Plus variant only.
- Make sure that your device should be charged at least 50% or higher.
- You will require a PC or Laptop with a USB Data Cable.
- We always recommend our readers take a full data backup of the device for safety purposes.
- Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
- Download ADB and Fastboot Tool or Android SDK Platform tool
Firmware Installation Guide:
Check out the firmware flashing guide below for the Motorola Edge and Edge Plus. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.
Disclaimer:
Step 1. Bootloader Mode
Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.
Step 2. Connect Your Device to PC:
After booting your Motorola Edge and Edge Plus into bootloader mode, now connect it to the PC using the USB Cable.
Step 3. Download Stock ROM/Firmware:
To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.
You can also download the full stock ROM from the above download flash file section on this guide.
Step 4. Flashing Guide:
- The next step is to open the command window and go to the adb folder
- Enter the following command to flash the firmware.
- fastboot oem fb_mode_set
- fastboot flash partition gpt.bin
- fastboot flash bootloader bootloader.img
- fastboot flash logo logo.bin
- fastboot flash vbmeta vbmeta.img
- fastboot flash boot boot.img
- fastboot flash dsp dspso.bin
- fastboot flash dtbo dtbo.img
- fastboot flash recovery recovery.img
- fastboot flash super super.img_sparsechunk.0
- fastboot flash super super.img_sparsechunk.1
- fastboot flash super super.img_sparsechunk.2
- fastboot flash super super.img_sparsechunk.3
- fastboot flash super super.img_sparsechunk.4
- fastboot flash super super.img_sparsechunk.5
- fastboot flash super super.img_sparsechunk.6
- fastboot flash super super.img_sparsechunk.6
- fastboot flash modem NON-HLOS.bin
- fastboot flash fsg fsg.mbn
- fastboot flash bluetooth BTFM.bin
- fastboot oem fb_mode_clear
- fastboot erase userdata (Do it, if you want to clear all your data)
- Now your device will reboot into bootloader with the firmware you installed.
That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.
fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash logo logo.bin fastboot flash vbmeta vbmeta.img fastboot flash boot boot.img fastboot flash dsp dspso.bin fastboot flash dtbo dtbo.img fastboot flash recovery recovery.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.6 fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastboot flash bluetooth BTFM.bin fastboot oem fb_mode_clear fastboot erase userdata (Do it, if you want to clear all your data)
