If you are here, then you may be looking for a firmware flash file for your BQ Aquaris E4. If yes, then you are in the right place. In this guide, we will help you to flash the Stock ROM on BQ Aquaris E4 by using the SP Flash tool.
We have shared all the pre-requisites files to download and install the stock ROM flash file on your device.
Why We Need Stock Firmware?
Stock Firmware or a Stock ROM is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your BQ Aquaris E4. If you are facing any problem with your device, your final attempt will be to re-install the stock ROM. This way, you can restore your device back to stock ROM. This guide will be more useful to those users who always want to try rooting, installing mods or custom ROM.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the BQ Aquaris E4 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from BQ Aquaris E4
- You can fix the boot loop issue on BQ Aquaris E4
- Fix Unfortunately, the app has stopped error on BQ Aquaris E4
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot BQ Aquaris E4
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore BQ Aquaris E4 back to Factory State
How to Install BQ Aquaris E4 Firmware Flash File
Before installing the Stock ROM on your BQ Aquaris E4, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Firmware Details:
- Device Name: BQ Aquaris E4
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6582
Pre-Requirements:
- Supported device: BQ Aquaris E4
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Full Data Backup without Root
- Nandroid Backup via TWRP
- Download Drivers and Tools: VCOM drivers, SP Flash Tool and BQ USB Drivers
- Firmware Flash File:
- BQ_Aquaris_E4_2.0.1_20150701_1250_MT6582.zip: Download
Instructions to Install: via SP Flash tool
Now, without wasting any more time, let’s jump into the firmware installation steps below:
Full Data Backup without Root
Nandroid Backup via TWRP
BQ_Aquaris_E4_2.0.1_20150701_1250_MT6582.zip: Download
Make sure you follow and download all the required files and flash tool on your PC.
Open the flash tool exe file to open the SP Flash Tool User Interface
Once your load the SP Flash tool UI, Tap on Download option
In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
Once you load the file, click the Download button
To start the upgrade process of stock ROM on your BQ Aquaris E4, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
When the phone connects, your device will start upgrading the stock firmware
You need to wait for a few minutes to complete the upgrade process.
Once the flashing process completes, you will find a green button which means a successful upgrade.
That’s it! You can reboot your BQ Aquaris E4
Follow our full-depth video guide below:
Video Guide to Install Stock ROM via SP Flash Tool
That’s it, guys. We hope that you’ve installed the Stock Firmware on your BQ Aquaris E4 device successfully. Feel free to ask in the comments below for any queries.
