Infinix Note 12 Turbo was launched in India and runs on Android 11 with XOS 10.6 on top. The device features a 6.7-inch full-HD+ AMOLED display. It is powered by a MediaTek Helio G96 SoC, along with up to 8GB of RAM and 128GB of storage. Infinix Note 12 Turbo sports a triple rear camera setup that compromises a 50 MP primary sensor, along with a 2 MP macro shooter and a QVGA sensor. There is a 16-megapixel selfie camera on the front with a dual-LED flash.

Today we have the latest firmware flash file for the Infinix Note 12 Turbo (X670) based on Android 12 (XOS 10.6) powered by a MediaTek Helio G96 processor. To install the firmware flash file, we need a software called SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.

This process is helpful if you have bricked your device, lag, or shuttering performance, to fix Bluetooth and WiFi issues, and to unroot or bypass the FRP lock. So without further wasting our time, let’s understand what is stock firmware flash file.

Infinix Note 12 Turbo Device Overview:

The Infinix Note 12 Turbo features a 6.7 inches AMOLED panel with a 60 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The screen has a peak brightness of 1000 nits. We also get Corning Gorilla Glass 3 at the front for protection. Under the hood, we get the MediaTek Helio G96 processor built on a 12 nm manufacturing process. It is an octa-core processor with two Cortex-A76 cores clocked at 2.05 GHz and six Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G57 MC2. The smartphone comes with Android 12 out of the box with XOS skin running on it.

In terms of optics, we get a dual-camera setup at the rear and a single selfie camera at the front. The dual rear camera setup consists of a 50MP primary sensor paired with an f/1.6 lens, and a 2MP depth sensor paired with an f/2.4 lens. The selfie camera at the front is a 16MP primary sensor paired with an f/2.0 lens. The rear camera system can capture 2K videos at 30 fps, while the front camera is limited to 1080p video recording.

The smartphone comes with a single storage variant with 8GB of RAM and 128GB of internal storage. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get WiFi with a/b/g/n, Bluetooth 5.0, GPS, Infrared, and USB Type C. And for sensors, we get a side-mounted fingerprint sensor, light sensor, proximity sensor, accelerometer, compass, and gyroscope. Powering it all is a 5000 mAh battery that can be topped up quickly using a 33W power adapter. The smartphone is available in three color options: Sapphire Blue, Force Black, and Snowfall.

Stock Firmware and its Advantage

The smartphone OEMs don’t provide that many customizations or functionalities to the device by default. But it’s the most stable ROM according to the device model and Android version.

While most of the third-party firmware comes with system bugs and stability issues. In this case, you may find battery issues, camera issues, network issues, basic features missing, lags, heating, slow down in performance, and more. But whenever you move to the Stock ROM, you can fix these issues easily. Here we have mentioned some of the Stock ROM advantages below:

  • Flash Stock To Unbrick your Infinix Note 12 Turbo (X670)
  • Fix the device boot loop issue
  • Upgrade and Downgrade your phone software version
  • Flash Stock ROM to unroot the device
  • Fix Bugs on your phone
  • Fix lag or stutter on Infinix Note 12 Turbo
  • Increase software performance, battery draining issue, OTA update issue
  • Revert back to Stock ROM will gain phone warranty (if applicable)

Firmware Details:

  • Device Supported: Infinix Note 12 Turbo (X670)
  • Tool Supported: Smartphone Flash Tool
  • Processor: MediaTek Helio G96
  • Android OS: Android 12, XOS 10.6
  • File: Software Update
  • Gapps: Included

Check for OTA Updates Manually

Your device will itself detect and grab the OTA when it becomes available. You will get a notification to install it. If you don’t get the OTA automatically, then manually check for the update. Follow these simple steps mentioned below.

  • Go to the device Settings > System menu > System Update > Tap on Check for Update option.
  • If the OTA update appears then tap on Download and install to begin the installation process.
  • It may take a few minutes and then reboot your device.
  • Now, your handset will boot into a new system.

Now, you have to download the Stock Firmware file for Infinix Note 12 Turbo from below.

Steps to Flash Firmware File on Infinix Note 12 Turbo (X670) 

Now, follow the full step-by-step installation process to easily flash the Stock Firmware on your Infinix Note 12 Turbo device. But before heading over to the installation process, let’s take a look at the requirements.

Pre-Requirements:

  • ROM file supported: Infinix Note 12 Turbo (X670) only. Don’t use it on other devices.
  • Charge the device battery up to 60% at least for a smoother process.
  • You will require a Windows PC/Laptop and a USB cable to connect your device to the PC.
  • Flash Tool: Download the SP Flash tool
  • USB Drivers: Download Infinix USB Drivers | MTK USB Drivers

Infinix Note 12 Turbo X670 Flash Files:

Instructions to install:

Now, let’s go to the installation steps. Here we have provided the installation method in both writing and video guide.

Warning

Additionally, you can follow the video tutorial as well for better guidance.

We hope that you have successfully installed the Stock Firmware on your Infinix handset model Infinix Note 12 Turbo. For any queries, you can write them down in the comments below.