Today Asus rolled the latest software update for Asus ZenFone Live with variant ZB501KL. The update bumps the build number WW-13.1407.1711.51. This update is all about the Android security maintenance and VOLTE Support for some carriers on ZenFone Live (ZB501KL). Now you can download and update ZenFone Live to latest Security Patch update with software version v13.1407.1711.51.

The update is rolling via OTA for users around the globe. It is sent in a phase-wise manner and it may take few days to reach every corner of the world. If you have received the latest update then hit the DOWNLOAD button to start upgrading your ZenFone Live to WW-13.1407.1711.51. With this update, Asus has rolled the latest UI skin of  ZenUI 4.0 for ZenFone Live.

Want to check the update manually? then follow the below instructions on How to check the OTA update on ZenFone Live (ZB501KL).

How to check OTA Update on ZenFone Live manually?

Please go to 「Settings」–> 「About」–>「System update」and press「Check update」 to make sure if the firmware is the latest version. If you have the update, then before hitting the download button, make sure to read the below instructions.

Before proceeding to download, your phone must have enough battery backup with at least 50% battery. Also, check if you have enough storage to download and install the latest update on ZenFone Live (ZB501KL). We suggest you to choose a Wi-Fi or a 4G connection to download it. Also, don’t forget to take the data backup to avoid any problem in case things go wrong. After following the procedure mentioned above, you can now start downloading latest update on ZenFone Live (ZB501KL). As this update is an incremental update, it wouldn’t take a lot of time to download and install.

Steps to Install WW-13.1407.1711.51 FOTA Update for ZenFone Live (ZB501KL)

If you have not received the update, then don’t worry. In this guide will help you to install WW-13.1407.1711.51 FOTA Update on ZenFone Live. We have given the full instructions and download link to upgrade your phone to the latest version.

[su_note note_color=”#fffdc4″ text_color=”#000000″]

Latest Changelog:

  • Enable Operator VoLTE

[/su_note]

Required Firmware File

Note :

  • Your phone must be running official Stock ROM.
  • Ensure your phone is not rooted.
  • GetDroidTips.com is not responsible for any damage to your phone while installing this Update.
  • Make sure that you have latest USB drivers installed
  • Take the complete backup of your phone and then proceed.

Pre-Requisites

  • This Firmware WW-13.1407.1711.51 is supported only on ZenFone Live (ZB501KL).
  • Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your phone.
  • Download ADB and Fastboot Drivers for the 2nd Method

Method 1 to v13.1407.1711.51 Marshmallow on ZenFone Live : 

  • First of all Download the zip file from above link and rename the file to update.zip.
  • Now Switch Off your device and reboot into recovery mode by pressing Power button +Volume UP button.
  • In recovery mode select apply update from sd card.
  • Now Choose update.zip file which you downloaded.
  • Wait until installation process completes.
  • Once the installation process is completed and You can Reboot your ZenFone Live.
  • That’s it, fellas! Done. you have upgraded your smartphone.

Method 2 to Install v13.1407.1711.51 Marshmallow on ZenFone Live : 

  • First of all Download the ADB and Fastboot drivers for Windows and Mac and extract it
  • Now move the downloaded OTA zip file to ADB Folder
  • Enable USB Debugging
  • To Enable USB Debugging, First of all, You need to activate Developer Option on your smartphone.
  • To activate, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled”.
  • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
  • In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click.
  • Reboot your phone to recovery by pressing Volume UP + Power button.
  • Now connect the PC to Mobile with USB Cable.
  • Now enter the following command in the command window that you open
  • adb devices
  • This command will show if any device is connected properly. If it doesn’t show, then please check the drivers are installed properly or if the attached cable is damaged.
  • If your device is listed, then please type the below command in your command window.
  • adb sideload File_name.zip
  • Wait until installation process completes.
  • Once the installation process is completed and You can Reboot your ZenFone Live.
  • That’s it, fellas! Done. you have upgraded the Asus ZenFone Live.

You have successfully upgraded your phone to the latest version for ZenFone Live (WW-13.1407.1711.51) which is based on latest ZenUI 4.0OS. If you have any questions or doubts or even feedbacks. Please comment below

adb devices

adb sideload File_name.zip