Huawei has unveiled its new flagship device i.e., the Huawei P40 Pro Plus. It sports 6.58 inch OLED display, Kirin 990 SoC, Penta camera setup, 8GB RAM, 256 or 512GB ROM, 4200 mAh battery, and runs on Android 10. If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Huawei P40 Pro Plus USB Drivers for Windows 7, 8, and 10 very simple.

It is very necessary to have USB drivers whenever you have to connect Huawei P40 Pro Plus to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Huawei P40 Pro Plus manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Huawei P40 Pro Plus USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Huawei P40 Pro Plus Specifications: Overview

The Huawei P40 Pro Plus features a 6.58 inches OLED display with a dual punch hole, and a Full HD+ resolution. It has a screen to body ratio of 91.6 percent, a pixel density of 441 Pixel Per Inch (PPI), a resolution of 1200 x 2640 pixels, a screen refresh rate of 90Hz, and it is also HDR 10 compatible display.

Underneath the Huawei P40 Pro Plus, it sports the Kirin 990 5G SoC, which is built on the 7nm process. This setup includes two Cortex A76 cores that clocks at 2.86GHz, another two Cortex A76 cores which clocks at 2.36GHz, and finally four Cortex A55 cores that clock at 1.95GHz. To the GPU side, it sports the Mali G76 MP16 GPU. Talking about the memory side, it comes with 8GB of RAM. Further, it comes with 256, and 512GB of UFS 3.0 internal storage.

Coming to the optics, the Huawei P40 Pro Plus sports a Penta camera setup. This setup includes a primary 50MP with f/1.9 aperture, OIS, and PDAF. It pairs with a periscope 8MP telephoto sensor with f/4.4 aperture, OIS, 10x optical zoom, and PDAF. It also gets another 8MP telephoto sensor with f/2.4 aperture, OIS, 3x optical zoom, and PDAF. Further, it gets a 40MP ultra wide-angle sensor with f/1.8 aperture, and finally, it gets a TOF 3D sensor. It gets Leica optics and LED flash. To the front, it gets a 32MP sensor with f/2.2 aperture and PDAF. It also gets an IR TOF 3D (depth or biometric sensor). Both the front and rear can shoot videos in 4K resolution.

It packs a 4,200mAh battery and gets support for 40W fast wired and wireless charging tech. It also gets support for 27W fast wireless reverse charging. Sensors onboard include Infrared face recognition, fingerprint (under display, optical), accelerometer, gyro, proximity, compass, and color spectrum. It is available in two color options i.e., in White Ceramic and Black Ceramic. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac/ax, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.1, A2DP, LE, GPS with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS, NavIC, NFC, Infrared port, and USB 3.1, Type-C 1.0 reversible connector. The device runs on EMUI 10.1, which is based on Android 10 (AOSP + HMS). The device also gets IP68 protection i.e.; it can withstand up to 1.5m for 30 minutes in water.

Huawei P40 Pro Plus USB drivers

The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Huawei P40 Pro Plus from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.

You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download double tap on the file and follow the instructions on the screen.

How to Install Huawei P40 Pro Plus Latest USB Drivers

You can download and install Huawei P40 Pro Plus USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.

Huawei P40 Pro Plus ADB Fastboot Tool:

If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.

What is ADB?

ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.

What is Fastboot:

Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.

Instructions to Install:

You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.

For Windows //// For Mac 

  • EMUI 9.1 Official Now: What’s New, Supported Huawei devices list, and Download
  • EMUI 10 for Huawei and Honor: Android 10 base with Supported device list
  • List of Supported TWRP Recovery for Huawei Honor Devices
  • Download Huawei MTK Secure Boot Download Agent loader Files [MTK DA]
  • Huawei Honor VoWiFi supported device: WiFi calling feature coming soon
  • Huawei Android 11 Update: Supported device