Nubia, the gaming smartphone brand, has unveiled its new smartphone i.e., the Nubia Play 5G. This smartphone comes with a 6.65 inch AMOLED display with a massive 144Hz screen refresh rate, Snapdragon 765G, quad rear cameras, 5100mAh battery, 6/8GB RAM, 128/256GB ROM, and runs on Android 10. If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Nubia Play 5G USB Drivers for Windows 7, 8, and 10 very simple.

It is very necessary to have USB drivers whenever you have to connect Nubia Play 5G to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Nubia Play 5G manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Nubia Play 5G USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Nubia Play 5G Specifications: Overview

The Nubia Play features for a 6.65 inches AMOLED display with a Full HD+ resolution without any type of notches or punch hole. It also has an aspect ratio of 19:5:9, a resolution of 1080 x 2340 pixels, a pixel density of 388 Pixel Per Inch (PPI), a screen to body ratio of 80.5 percent, a massive refresh rate of 144Hz, and a touch sampling rate of 240Hz. This AMOLED display also comes with an optical in-display fingerprint scanner.

While talking about the internals, the Nubia Play 5G sports the Qualcomm Snapdragon 765G, which is built on the 7nm process. This octa-core setup includes one Kryo 475 Prime core, one Kryo 475 Gold core, and six Kryo 475 silver cores. To the GPU side, it sports the Adreno 620 GPU. Talking about the memory side, it comes with 6, and 8GB of RAM. And it comes with 128, and 255GB of UFS 2.1 onboard storage. However, the brand doesn’t reveal whether this storage can be expanded or not. The device runs on the NubiaUI 80 that is based on Android 10.

Coming to the optics side, the Nubia Play sports a quad rear camera setup that is arranged in a vertical manner to the center of the smartphone. This camera setup includes a primary 48MP Sony IMX 582 sensor with an aperture value of f/1.8 and PDAF. This sensor pairs with an 8MP ultra wide-angle sensor with an aperture value of f/2.2, and a tertiary 2MP macro sensor with an aperture value of f/2.4. And finally, this setup also includes a 2MP depth sensor with an aperture value of f/2.4. To the front, the device comes with a 12MP sensor with an aperture value of f/2.0.

ZTE has included a massive 5,100 mAh battery on this device to long last because of the 144Hz screen. This also supports for 30W fast charging. It is available in three color options, namely the Black, Blue, and White. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.0, A2DP, LE. GPS with A-GPS, GLONASS, GALILEO, BDS, NFC. And USB 2.0, Type-C 1.0 reversible connector. Sensors on board include accelerometer, gyro, proximity, and compass. Further, the right-hand side of the phone features the two capacitive shoulder buttons for enhanced gaming utility i.e., the Touch-sensitive gaming triggers.

Nubia Play 5G USB drivers

The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Nubia Play 5G from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.

You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download, double tap on the file and follow the instructions on the screen.

How to Install Nubia Play 5G Latest USB Drivers

You can download and install Nubia Play 5G USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.

Nubia Play 5G ADB Fastboot Tool:

If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.

What is ADB?

ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.

What is Fastboot:

Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.

Instructions to Install:

You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.

For Windows //// For Mac 

  • List of Android 10 Supported Nubia Devices
  • List of Supported TWRP Recovery for ZTE and Nubia Devices
  • List of Android 10 Supported Nubia Devices